Fujifilm FP3000b Negatives

Discussions on the Polaroid® and Fujifilm instant film: 600 film - SX 70 film - PX 100 and PX 600 - Image/Spectra, Type 100, Type 80, 4x5 Inch, 8x10 Inch, I-Zone, Instax ...
Livio
P.......
Messages : 2
Inscription : dim. 08 mars 2020 / 22:05 pm
Contact :

Fujifilm FP3000b Negatives

Messagepar Livio » jeu. 12 mars 2020 / 15:56 pm

Hello, I'm new to this forumbut I'm following the site for a very long time.
How do we keep clean the FP3000b negatives once they are separated from their positive?
I mean how do you wash them and keep them clean from the dust that they get once peel apart?
Many thanks

Avatar de l’utilisateur
jj_reypol
Polaroid 600SE
Messages : 3314
Inscription : sam. 21 avril 2012 / 14:24 pm
Localisation : Alsace
Voir la galerie photo de ce membre

Messagepar jj_reypol » sam. 14 mars 2020 / 10:55 am

Hello, welcome to our forum

I understand your question about the Fuji FP-3000B "negative" or sometimes called "goop".
It's not as the FP-100C type wich gives a "negative" you can process by using bleach and then
wash the "negative" with clear water.

The FP-3000B "negative" or "goop"' will not be processed nor washed; you only have to dry it
and protect it from dust. After you can scan it and reverse the tones with a software, then edit
it, etc…

This is what I know about; maybe other people will give you some more infos. Or you can find
more on the internet.

I hope this will help, greetings

:rocks:

Avatar de l’utilisateur
ulf
Fuji FP-1
Messages : 4681
Inscription : lun. 12 septembre 2011 / 13:28 pm
Localisation : Suisse
Contact :
Voir la galerie photo de ce membre

Messagepar ulf » sam. 14 mars 2020 / 13:51 pm

well, you should wash it. clear water, softly get rid of the developing material.

and when it's dry, just keep it somewhere hidden from the light and that's it.

some examples here : https://www.flickr.com/photos/ulfram/al ... 0367063782

b
Mr. CONNER: Wait a second, I was here first.
AL BUNDY: Yeah, yeah, so were the Indians.


A DONNER / ECHANGER:
pièces détachées pour pack 100


et puiske je peine à instantaner ces temps, voici la version digitale de mes frasques: https://www.instagram.com/ulf_ramirez/

Avatar de l’utilisateur
tripleZone
Polar...
Messages : 128
Inscription : dim. 18 décembre 2011 / 19:55 pm
Localisation : Germany
Contact :
Voir la galerie photo de ce membre

Messagepar tripleZone » sam. 14 mars 2020 / 18:58 pm

Hey,

Jean Jacques has described the process fine. According to Ulf, you should be careful with washing the negative. My last washes affected the chemical surface and damaged the negative. Normally, I only dry, scan and let them go. But try yourself, it makes fun.

Best, J.
Dernière édition par tripleZone le dim. 15 mars 2020 / 09:59 am, édité 1 fois.
-tripleZone-

Avatar de l’utilisateur
jj_reypol
Polaroid 600SE
Messages : 3314
Inscription : sam. 21 avril 2012 / 14:24 pm
Localisation : Alsace
Voir la galerie photo de ce membre

Messagepar jj_reypol » sam. 14 mars 2020 / 23:43 pm

Hello Jürgen,

Sometimes I also washed it very carefully with water, and often the goop was a little damaged !

Livio
P.......
Messages : 2
Inscription : dim. 08 mars 2020 / 22:05 pm
Contact :

Messagepar Livio » lun. 16 mars 2020 / 00:03 am

Thank you!
More comments are welcome!

Avatar de l’utilisateur
facono
Polaroid 20x24
Messages : 12172
Inscription : sam. 29 août 2009 / 20:19 pm
Localisation : Paris
Voir la galerie photo de ce membre

Messagepar facono » mer. 01 avril 2020 / 09:28 am

Hi Livio,
you could see some new FP3000B negatives, goops, actually in the gallery. Just dried carefully, the last layer of emulsion is quite fragile and then scanned in a flatbed Epson scan.
Be well and carefull.
Tarde venientibus ossa.


Revenir vers « Questions about Polaroid® films »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité