Polaroid Image 2 problem

Discussions about Polaroid® Image / Spectra: Polaroid® Image, Polaroid® Spectra, Polaroid® Spectra 1200i, Onyx, Cam Pro, Macro 5 SLR ...
pietr0
P.......
Posts: 4
Joined: Fri 02 November 2018 / 10:25 am
Contact:

Polaroid Image 2 problem

Postby pietr0 » Fri 02 November 2018 / 17:08 pm

Hi Everyone! :D I've got a problem with my Polaroid Image 2
I bought it last week, and only few days ago I took the films.
Once I put them inside, I noticed that the light shield comes out in a strange way, a bit slowly and noisy but I see the "ready" LED on and I ignore it presuming it was alright.
After a while I try to shoot, and here's the rip-off, nothing comes out :(
I can hear only a slight noise but the film remains inside, does not come out, what could the problem be?

xya
Konica Instant Press
Posts: 5118
Joined: Sun 31 July 2011 / 19:05 pm
Location: Calais, Köln

Postby xya » Fri 02 November 2018 / 20:01 pm

there was a big problem with the film cartridges. what is the date of production of your film? it's indicated on the outside of the box...
xya
matos : mamiya universal avec tout (instax inclus); 360 100 propack; mp4 optiques div en 100 + 4x5; sx670 aussi sonar et i-type one600pro OneStep+ I-2; 8x10 processor; multishot 84; bigshot; spd360; cu-5 3" et 5" en 100 et 4x5; daylab + copy pro; instax 500af 210 100 50 sq10 liplay; lomo instant automat et glass instax wide; mint RF70; superwidestax option; dos instax wide 4x5; lomowidestax; dos coyote sq rb67; pinstax wide; diana diana square holga lc-a lc wide instax escura 60s. beh oui, c'est moins qu'avant.
sites : http://www.120folder.com http://www.a7camera.com http://www.instantphoto.eu http://www.135compact.com http://www.plastikcam.com/

pietr0
P.......
Posts: 4
Joined: Fri 02 November 2018 / 10:25 am
Contact:

Postby pietr0 » Fri 02 November 2018 / 20:33 pm

xya wrote:there was a big problem with the film cartridges. what is the date of production of your film? it's indicated on the outside of the box...

09/18
I try to figure out on my own, at the end I opened the front of the package, insert it again, and the last four pictures comes out "fine"
I would like to link some pics but I can't

xya
Konica Instant Press
Posts: 5118
Joined: Sun 31 July 2011 / 19:05 pm
Location: Calais, Köln

Postby xya » Fri 02 November 2018 / 23:26 pm

pietr0 wrote:09/18
I try to figure out on my own, at the end I opened the front of the package, insert it again, and the last four pictures comes out "fine"
I would like to link some pics but I can't

that's the newest film. it should not make any problem.

if you want to post an image link, go to "éditeur avancé" just below the last message. in the new window that will open, there is a "Img" button above the message area. click on it. (img)(/img) will appear in square brackets. go between the brackets and paste your link (img)(link)(/img). should work like a charm.
xya
matos : mamiya universal avec tout (instax inclus); 360 100 propack; mp4 optiques div en 100 + 4x5; sx670 aussi sonar et i-type one600pro OneStep+ I-2; 8x10 processor; multishot 84; bigshot; spd360; cu-5 3" et 5" en 100 et 4x5; daylab + copy pro; instax 500af 210 100 50 sq10 liplay; lomo instant automat et glass instax wide; mint RF70; superwidestax option; dos instax wide 4x5; lomowidestax; dos coyote sq rb67; pinstax wide; diana diana square holga lc-a lc wide instax escura 60s. beh oui, c'est moins qu'avant.
sites : http://www.120folder.com http://www.a7camera.com http://www.instantphoto.eu http://www.135compact.com http://www.plastikcam.com/

pietr0
P.......
Posts: 4
Joined: Fri 02 November 2018 / 10:25 am
Contact:

Postby pietr0 » Sat 03 November 2018 / 09:17 am

pietr0 wrote:Hi Everyone! :D I've got a problem with my Polaroid Image 2
I bought it last week, and only few days ago I took the films.
Once I put them inside, I noticed that the light shield comes out in a strange way, a bit slowly and noisy but I see the "ready" LED on and I ignore it presuming it was alright.
After a while I try to shoot, and here's the rip-off, nothing comes out :(
I can hear only a slight noise but the film remains inside, does not come out, what could the problem be?

Hope this can help
https://drive.google.com/open?id=13NUbZuSAgPF9-IuoaVN51t5kKrBi_4bd those are the first two pics, I had to extract them by hand
https://drive.google.com/open?id=1wimSu0p6uLOGdnsIUbOimb1Iar46yiYQ as you can see, the led in on, so there's voltage
https://drive.google.com/open?id=1_SgHvfu3J4ZEZYolJoDWZ5k-uRmlaUQU expire data 09/10
https://drive.google.com/open?id=19frwAt9GyvMJYqiNEReXbC9s83tG-WHZ then I opened the front, insert them once again
https://drive.google.com/open?id=1xIsqf5ijMGEOUoFx_YM7xc6FLHSgbx3R the light shield comes out very strange and it stucks at 2/3 of th way. in fact come films remain stuck
https://drive.google.com/open?id=1_bHk7NwUpHtXjhp8oHBpxnOO-O1as6cC after opening the front, the last 4 pics come out "fine"
the 5th anf 6th they were a test, I was in front of the mirror with the flash so not a good idea, the 7th I tried to do a pic outside so you can see only the roll-up shutter, and the last one came out nice, I think. That's it

User avatar
Meaulne
Polaroid 20x24
Posts: 6034
Joined: Mon 04 May 2009 / 23:53 pm
Location: RP SO
Voir la galerie photo de ce membre

Postby Meaulne » Sun 04 November 2018 / 13:32 pm

Hi pietr0, here is a link to a Polaroid spectra Manual repair, it's not the same model as your but if that can help...

edit : I've just found an other manual repair ; initially these manuals were hosted byhttp://www.everythingretek.com/PRDLibrary/LIBRARY8 but it's dead now, fortunately i've download some long time ago
Comme sur les sites de vielles bagnoles ... on sait bien que maintenant y'a mieux...
Mais question Radio je reste Fidel à ....
https://www.radiobeton.com/www/
"un bibelot vient de nulle part, mais va sur la cheminée" Fred

pietr0
P.......
Posts: 4
Joined: Fri 02 November 2018 / 10:25 am
Contact:

Postby pietr0 » Sun 04 November 2018 / 18:49 pm

Meaulne wrote:Hi pietr0, here is a link to a Polaroid spectra Manual repair, it's not the same model as your but if that can help...

edit : I've just found an other manual repair ; initially these manuals were hosted byhttp://www.everythingretek.com/PRDLibrary/LIBRARY8 but it's dead now, fortunately i've download some long time ago

Thank you so much Meaulne :) but I'm not sure whether to send it back or keep it, we'll see


Return to “Polaroid® Image/Spectra”

Who is online

Users browsing this forum: No registered users and 1 guest