The Land 250 as other cameras type 100 has two rollers between which the picture goes.
The problem is that as and use, the chemical tends to flow on these famous rolls, and eventually they will lock.
After having wasted several films, I realized the utility to clean.
I took the opportunity to take some pictures:
1) opening of the camera
(Take a hammer just to be credible and frightening, there is no need to force the material)
2) It decouples the rolls by pressing the red tab, then pull the block towards you.
3) Boo is all dirty!
Wipe the rollers with a clean damp cloth and dry. Never use alcohol.
Check properly, it's dirty everywhere
Once it's clean the rollers will be much more flexible and friendly
A quick spray of air into the unit to remove dust (Warning not too close-up bullies!).
Feel free to comment on this topic, if you ever have any other ideas.
Discussions on the Polaroid® type 80 and 100 with the famous 100-230-250-350 ... and Pro 180, 185, 190 and 195, ProPack, Automatic, Colorpack, The Reporter, 20-30 Instant ...
1 message • Page 1 sur 1
Qui est en ligne ?
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité